Choosing a good wet tile saw is important if you want to have a precise and beautiful cut for your tiles. A slight deflection of the tile’s edge is noticeable and can ruin one’s design.
Likewise, you’ll need powered cutting tools whose accuracy is consistent and can help you in cutting a small fraction of tiles to fit in tight spaces.
Here we are going to show you a thorough guide in choosing the best wet tile saw to fit your need and budget. Moreover, we have included the top 10 best wet tiles saw in the market so you don’t have to hover over a hundred units.
More…
Best Wet Tile Saw (January 2022) : Top 10 Picks & Reviews
| MODEL | PRICE | OVERALL |
| SKIL 3540-02 | check price | |
| SKIL 3550-02 | check price | |
| DEWALT D24000S | check price | |
| PORTER CABLE PCE980 | check price | |
| DEWALT DWC860W | check price | |
| QEP 22650Q | check price | |
| MK 158252 | check price | |
| Ryobi 4-inch | check price | |
| QEP 22400Q | check price | |
| Leegol Electric 7-Inch | check price |
KNOW WHAT TO LOOK FOR
Here are some of the most important things you need to consider when choosing for the right wet tile saw.
1. Types
There are different types of saws in the market and each has its respective pros and cons.
• Snap or rail cutters
- Manually operated
- Simplest and low cost
- Not suitable for stone tiles
- Cuts are not that precise and straight
• Handheld wet tile saws
- Small, light and portable units
- Can be both a wet or dry saw
- As durable as an overhead type
- Capable of making special cuts on natural or artificial tiles
- Its cutting wheel is coated with diamond powder which makes it sharper and stronger.
• Tabletop wet tile saws
- Its line of sight is not that visible
- In order to make the cut, you need to slide the tile through the saw
- The friction produced upon sliding the tile through affects the precision of the cut
• Overhead motor wet tile saw
- The same with the table top, you need to slide the tile through the saw blade to make the cut. The difference, this one uses a rail system which mechanically drives the tile towards the saw blade.
2. Water Source
Some units use pumps to supply water for cutting. Make sure the water source is reliable as it affects cutting precision.
3. Drain
This is an added convenience as you won’t need to manually pour out the water from your tile saw.
4. Power and RPM
The tool’s motor power is measured in horsepower (hp) while rotational speed is in RPM. An ideal motor must provide a free-load RPM between 3,000 to 6,000. A ½ hp motor serves as the minimum requirement for a good tile saw.
5. Blade Types
Some units have saw blades which can be used for wet and dry cutting. If you are only aiming for wet cutting, then have a diamond blade for your unit.
6. Blade Capacity
This refers to the cutting depth and ability of the blade to cut through any tile material.
Wet Tile Saw reviews
1. SKIL 3540-02 7” Wet Tile Saw
check price on amazon
Tools included:
- Motor: 4.2 Amp
- RPM: 3,600
- Cross Cut Cap: 7.75”
- Cut Material: Stone and Masonry
| pros | cons |
| • Consistent straight cuts | • No serious negative complaints |
| • The fence works really fine | ? |
| • Great tool for an affordable price | ? |
The best thing about this tile saw it maintains a clean and precise cut from start to finish. Setting the fence had no issues and works very well. Great tool for an affordable price. Huge cost savings.
2. SKIL 3550-02 7” Wet Tile Saw
check price on amazon
Tools included:
- Motor: 4.2 Amp
- RPM: 3,600
- Cross Cut Cap: 7.75”
- Cut Material: Stone and Masonry
| pros | cons |
| • Precise Cuts | • Blade included is just basic, buy a nice one |
| • Durable hard plastic body | ? |
| • A workable hydrolock water system | ? |
The great thing about this tile saw is its Hydrolock water system where there is a constant splashing of water at the area to be cut. Other things to love about this saw include its blade guard, motor and strong plastic body which can resist wear and tear. The extension arm may be plastic but it’s really tough to do the job. Moreover, the saw is easy to clean and keep.
You just need to buy a decent blade for the blade included is just a basic one.
3. DEWALT D24000S 10” Wet Tile Saw with Stand
check price on amazon
Tools included:
- Motor: 1.5 hp
- RPM: —-
- Cross Cut Cap: 3-1/8”
- Cut Material: porcelain, stone, tiles
| pros | cons |
| • Precise and smooth cutting aided with the side water attachments | • Buy a nicer blade like the one included in the package is not suitable for all works |
| • Tough construction | ? |
| • Rail system works great | ? |
This saw tool is a great investment for it provides consistent straight cuts. The miter gauge is easy to set and hassle-free. The overall construction is sleek and tough. You can replace the blade guard hex screw with a knob in case you want blade changing to be easier. The water pump is also reliable to keep the cutting area wet and smooth for cutting.
Besides that, the blade included in the package is good but not really that nice for other cutting performance.
4. PORTER CABLE PCE980 Wet Tile Saw
check price on amazon
Tools included:
- Motor: 1.0 hp
- RPM: 2,850
- Cutting Cap: 17”
- Cut Material: porcelain, ceramic, stone tiles
| pros | cons |
| • Strong overall built | • Very little vibration |
| • Reliable cutting action | ? |
| • Great water management | ? |
The best feature about this tile saw is its water management function. It is able to hold enough water and only have minimal splashing which makes your work clean. It can smoothly cut through ceramic, porcelain, or stone tiles around 3/8”. Long lasting and durable unit.
There is a very little wobbling during operation but manageable and still provide straight cuts.
5. DEWALT DWC860W 4-3/8” Wet/Dry Masonry Saw
check price on amazon
Tools included:
- Motor: 10.8Amp
- RPM: 13,000
- Cross Cut Cap: 1-3/8”
- Cut Material: granite, porcelain, stone, tiles
| pros | cons |
| • Tough construction | • Water fitting is made from plastic |
| • Decent blade capacity | ? |
| • Precise cutting and easy to use | ? |
This tool is simply amazing for it can cut through a cement board with ease and no difficulty in following a straight line. Its overall construction is tough and sleek. The water line fitting on both sides is made from plastic but works pretty fine. The blade works decently and no complaint about it.
Else, the water is fitting is made from plastic.
6. QEP 22650Q 650XT ¾ HP Wet Tile Saw
check price on amazon
Tools included:
- Motor: ¾ hp
- RPM: 3,600
- Cross Cut Cap: 1-1/4 inch
- Cut Material: porcelain, tile, marble, granite, and stone
| pros | cons |
| • Lightweight and simple to use | • The ruler does not have enough measurement |
| • Sufficient cutting power | ? |
This compact tile saw is best for DIYers dealing with smaller jobs inside their home. It is light and easy to use. You can set this tool in less than 10 minutes. This tile saw does a smooth line cut for standard tiles, porcelain, marbles, and stone materials. Likewise, it comes with a miter gauge and rip fence.
A small trouble is the ruler does not have enough measurements.
7. MK Diamond 158252 MK-145 1/2hp Wet Tile Saw
check price on amazon
Tools included:
- Motor: 4A ½ HP
- RPM: 5,500
- Cross Cut Cap: 4-1/2 inch
- Cut Material: ceramic, stone tiles
| pros | cons |
| • Sturdy built | • No slide for a better cutting guide |
| • Decent blade | ? |
| • Adjustable fence | ? |
| • Good cutting guide | ? |
This is a great little saw which you can use for a variety of tiles. The blade included in the package is fine although it’s not that nice compared to other expensive and high-rated saw blades. Better if you’ll also change the water every 20 to 30 minutes to prevent any clog-ups.
There is no slide included but the guide perfectly works.
8. Ryobi 4-inch Wet Tile Saw
check price on amazon
Tools included:
- Motor: 12 Amp
- RPM: —-
- Cross Cut Cap: @90 deg – 1-5/32” @45 deg – ¾”
- Cut Material: marble, tiles, granite
| pros | cons |
| • Tough and rigid built | • The blade is fine but not that long lasting |
| • Compact size and easy to use | ? |
| • Great quality for a reasonable price | ? |
This tile saw amazingly cuts a 1-1/2″ granite counter top with ease. The cutting depth can be adjusted depending on the need. The overall construction of this tool is smooth and tough. A great home and DIY tool for small and medium works.
Note: just buy another expensive blade for this comes with just a decent one.
9. QEP 22400Q 3/5hp 4-inchTile Saw
check price on amazon
Tools included:
- Motor: 3/5 hp
- RPM: —-
- Cross Cut Cap: ¾ inch
- Cut Material: ceramic, marble, slate, stone tile
| pros | cons |
| • Great quality for a reasonable price | • Slight difficulty in using the arm for making angle cuts |
| • Smooth line cutting | ? |
| • Water management is great | ? |
I love this tile saw for it can cut both through small and larger tiles. Make sure you’ll always be mindful of the water level inside the tile saw and replace when clay-like form starts to appear. The ideal size for smooth cutting experience is around 4×4 or 6×6 tile. The overall construction of this saw tool is rigid and reliable.
However, it is not that suitable for floor cutting.
10. Leegol Electric 7” Wet Tile Saw
check price on amazon
Tools included:
- Motor: 5Amp
- RPM: 3,550
- Cross Cut Cap: 1-inch thickness 12” wide
- Cut Material: tile, marble, masonry, ceramic
| pros | cons |
| • Easy set and use | • Fence adjustments are slightly difficult |
| • Rigid and sleek construction | • Water refilling and the emptying process is a little bit hassle |
| • Competitive straight and diagonal cuts | ? |
Right out from the box, this saw tool is so easy to set up and use. It uses no pump so no worries about clogging up. It can do smooth line straight and diagonal cuts with ease. Overall, it offers surprisingly good quality at an affordable price.
There is no quick adjustment for the fence and some find the water refilling and emptying process a bit hassle.
