The question of what you should be doing when having the dilemma of buying a brad nailer has become apparent in today’s craftsmen’s blogs. The Best Brad Nailer is by far the one giving you more advantages from its daily use and giving you the best results after prolonged hours of intense use in connecting various pieces of metal or plywood.
What is the brad nailer in the first place?
Since the appearance of the professional brad nailers, the craftsmen needed a lot of time to connect various parts of wood surfaces. This explicit device has a powerful motor giving pneumatic pressure to nails for them to penetrate easily in the wooden mass. The brad nailer typically connected to an external power source and an air compressor unit that is giving it the adequate pressure to throw the nails to the wooden parts.
The brad nailers with modern technology features have a greater nail tank so that you can never run out of nails in the course of your daily job. There is also a special warning alarm or digital screen to show you the level of nails in the tank and make you eager to refill it before being emptied. Not to mention, that latest models of brad nailers are also having a digital adjustment of the desired depth so that you can choose how deep you want your nails to penetrate in the plywood you are trying to connect.
Brad nailers usually come together with other air compressor units so that the right pneumatic pressure exerted in the chamber of the nailer explosion. This is of crucial importance since the brad nailer cannot work without this external source of pressure, and as a result, it would not be of any use sooner or later.
Who Should Use a Brad Nailer?
Practically anyone who does finishing work and needs to affix wood without using screws or pre-drilling! Small cabins makers in particular benefit from brad nailers, as does anyone who needs to affix in a “blind spot.” Sometimes joiners will fire in a brad nail while they’re waiting for glue to dry as it allows the workpiece to be held in place while leaving only a small, easily-filled hole.
Think lightweight and minimal traffic.
The meaning is if you’re only affixing a lightweight piece of finishing, or the piece won’t be “handled” a lot, then a brad nailer will do the job.
Safety First
The very nature of any type of nail gun requires that we pay all due care and diligence to our safety, and that of those around us while we work. Make sure you’re wearing PPE, eye protection in particular, and pay attention to all trailing cables and cords. When using a combustion-powered nailer, be alert to the exhaust ports; make sure they aren’t blocked and are, if possible, directed away from your face.
Other buying tips to consider:
Take a closer look at the size of nails you are using: will they fit in your nailer, and does it have the power required to fire them? What about adjustments? If you need your nails to be counter-sunk, can you adjust this depth on the nailer? Off-site or on-site? Where the majority of your work be undertaken needs to be factored in if you’re going to be close to power points and air compressors or not. True finishing work? If so, look out for a non-marring rubber nose.
As you may have already understood, the brad nailers are competing with other kinds of tools like the finish nailers to give you more secure options to purchase them.
A Brad nailer and a finishing nailer look very similar. So, what are the main differences between a brad nailer and a finish nailer?
A Brad nailer will generally use thinner gauge nails (typically eighteen gauges). Since a Brad nailer uses thinner (and often smaller length) nails, they will usually be slightly lower power tools, in size, than a finish nailer. A Brad nailer is a useful tool when wanting to attach lightweight trim.
The smaller entry hole means you may not need to use wood putty to cover any nail holes. When working with thin pieces of trim, or other materials, a Brad nailer will reduce the risk of splitting or breaking, due to the smaller gauge of its nails.
A finish nailer, on the other hand, uses thicker (and sometimes larger length) nails allowing heavier pieces of wood to be attached. A finish nailer is a better choice when requiring a stronger attachment for your wood. This is especially so if you secure your material to a few studs.
Essentially a Brad nailer is used for attaching small, lightweight materials that do not require significant structural support, such as trim or a picket fence. A finish nailer, on the other hand, is better suited to materials requiring strong attachment to each other.
Some people ask whether they should get one type of nailer over the other, but in truth, they intended for different kinds of jobs. The experts often recommend Brad Nailer for people who have not used a nail gun before, as it generally considered a safer means of introducing oneself to using nail guns.
